Hotline:186-2180-9999

High Efficiency Air Filter

High Efficiency Air Filter

Different air filter elements are optional so as to ensure the quality of air system you need.
1. Piston-type filter element is sealed with shell to prevent unfiltered air from bypassing filters. 
2. Anti-corrosion filter-element.
a) Stainless element has good structural performance and low air-flow resistance.
b) Seam welding technology is applied to improve its strength. 
3. New matrix mixed fiber media
a) Enlarged effective area helps improve filtering efficiency, thus improving the working efficiency of our air filters. 
b) Big open area can reduce drop of pressure.
4. Filmed and closed foam sleeve.
a) Anti chemical corrosion and anti-oil corrosion types can be available.
b) Coalesced liquid can be prevented from inflowing to ensure high filtering efficiency.

12334

More features of our high efficiency air filter 
The chemical resistant end cover is bonded to media by special glue. Our high efficiency air filters are silicon-resin free and can work properly under 66.

Note: The air filter efficiency is based on ADF400 of CAGI standard, at a 38 inlet flow temperature.

Grade 9 
Grade 9 high efficiency air filters are suitable for removing liquid and condensate substances at 3μm. (5ppm, w/w Max remained oil content)
Double-stage filtering
1. First stage, two stainless orifice pipes can separate materials at 10 microns.
2. Second stage, deep media of fiber can remove solid and liquid particles at 3 microns

Grade 7
This type high efficiency air filter is used to remove liquid water and oil, and solid particles at 1 micron can also be removed (1.0ppm, w/w max remained oil content)
1. Both inside and outside filter elements are corrosion resistant. 
2. Double-stage filtering
(1) First stage, mixed fiber media and mesh media can remove most particles
(2) Second stage, mixed media of multilayer bonded epoxy can remove oil mist and solid particles

Grade 5
Grade 5 high efficiency air filters can be used to remove water-mist and oil-mist, and solid particles at 0.01 microns can be removed (0.01ppm w/w max remained oil content)
1. Both inside and outside filter elements are corrosion resistant. 
2. Double-stage filtering
(1) First stage, multilayer media of fiber and mesh can remove most particles
(2) Second stage, mixed media of multilayer bonded epoxy can remove the smaller condensation
3. Outside filmed and closed foam sleeve

Grade 3
Grade 3 high efficiency air filters are used to condense the smaller water mist and oil mist, and particles at 0.01microns can be removed too (0.001ppm w/w max remained oil content)
1. Both inside and outside filter elements are corrosion resistant.
2. Double-stage filtering
(1) First stage, filmed and closed foam sleeve can remove and pre-disperse air-flow 
(2) Second stage, mixed media of multilayer bonded epoxy can remove the smaller condensation
3. Outside filmed and closed foam sleeve

Grade 1
This kind of high efficiency air filters can be used to remove oil vapor and hydrocarbon, and solid particles at 0.01 microns can be removed (0.003ppm w/w max remained oil content)
1. Both inside and outside filter elements are corrosion resistant.
2. Double-stage filtering
(1) First stage, a layer of fine active carbon powder can remove most of oil vapors 
(2) Second stage, multilayer fiber media bonded with micro-fine active carbon powder can remove remained oil vapors
3. Multilayer fine media can effectively prevent pollutant from moving
4. Outside-filmed and closed type foam sleeve can prevent pollutant from moving
5. Operation life can be 1000 hours at rated conditions

Data Sheet

Model Capacity Nm 3/min Connection Qty. filter element Dimensions
A B C D
*007 0.7 G1/2" 1 90 230 255  
*015 1.5 G1/2",G1" 1 90 230 255  
*024 2.4 G1-1/2" 1 110 345 378  
*035 3.5 G1-1/2" 1 110 345 378  
*060 6.0 G1-1/2" 1 110 474 507  
*090 9 G2" 1 150 500 550  
*120 12 G2" 1 150 500 550  
*140 14 G2-1/2" 1 150 650 700 133
*180 18 G2-1/2" 1 150 800 850 133
*180F 18 DN80 1 336 940 1120 150
*220F 22 DN80 1 336 940 1120 150
*360F 36 DN100 2 500 1050 1250 250
*540F 54 DN100 3 500 1050 1250 250
*720F 72 DN125 4 600 990 1250 350
*900F 90 DN125 5 600 990 1250 350
*1100F 110 DN125 6 600 1070 1350 350
*1300F 130 DN150 7 700 1020 1350 450
*1450F 145 DN150 8 700 1020 1350 450
*1650F 165 DN150 9 780 1070 1400 500
*1800F 180 DN150 10 780 1070 1400 500
*2000F 200 DN150 11 780 1070 1400 550

Note: 1. Normal working pressure is 0.2-1.0Mpa. For ordering of high efficiency air filters with working pressure higher than 1.0Mpa, please give us a clear indication while placing orders. 
2. Capacity means the maximum capacity at working pressure of 0.7Mpa

Model Capacity Nm3/min
*-001ES 1
*-001E 2
*-004E 4
*-007ES 7
*-007E 13
*-013E 13
*-030E 30

*-: Precision Grade
C: 3μ
T: 1μ
A: 0.01μ

Select Capacity
How to achieve the maximum capacity when the working pressure isn't 0.7Mpa? Firstly, find out the capacity from the above form, and then multiply the number by the corresponding modified coefficient of minimum inlet pressure. 
Never choose air filters in accordance with pipe size. We should choose filters in line with capacity and running pressure.

Minimum Inlet pressure 2 3 4 5 6 7 8 9 10 12 14 16 18 20 21
Amending modulus 0.38 0.50 0.62 0.75 0.87 1.00 1.12 1.24 1.37 1.62 1.86 2.11 2.36 2.61 2.73

We are a major manufacturer of high efficiency air filters based in China. The company has obtained the ISO9001:2008 certificate. In order to satisfy the demand of our customers completely, we have produced many kinds of air compressors in addition to air compressor air filters. Screw air compressors, oil less air compressors, piston air compressors, and centrifugal air compressors, etc. are all available here. All these products are certificated with CE and TUV. 
If you are in searching of such products, please inquire and purchase our products at Shanghai Xinran Compressor Company.

Previousfirst_page
Nextlast_page
Group Members: